|
|
Shurflo
9300 Submersible Pump
The Shurflo 9300 pump is designed to be strong and yet lightweight
for use in irrigation, livestock, watering, remote homes, ponds
and island applications. It works well with the controls below and
appropriate solar modules to make a low-cost pumping system. Choose
solar modules with an amperage rating higher than required for the
head you will be pumping. Flow at 12 volts is approximately ½ of
the 24 volt flow below. Electrical connection is made with a quick
disconnect, so no splicing is required. The connector accepts a
variety of jacket cables. The strong, yet lightweight corrosion
proof plastic housing keeps the weight to only 6 pounds. The pump
can run dry without damage and is easily repaired in the field.
Maximum submersion for the Shurflo pump is 100 feet (30 meters).
Inlet is 50 mesh stainless steel screen. Pump weight is 6 lbs, dimensions
are 3.75”D x 12”. 1-year warrant |
Shurflo
9300 Submersible Pump and Controllers
|
| Name |
Price |
| Shurflo
902-100 |
$122.00 |
| Shurflo
902-200 |
$273.00 |
| Shurflo
9300 |
$689.00 |
|
Solar
Arrays for Shurflo 9300 Submersible Pump
These packaged photovoltaic array kits for the Shurflo 9300 pump
are ready for rapid on site assembly and installation. The arrays
feature modules with high efficiency crystalline cells, seasonally
adjustable pole top racks of quality painted steel and aluminum,
interconnection wiring. Other arrays are available with different
modules and types of mountings. Pole not included. |
| Name |
Weight
( ) |
Price |
| PWS-1E60/30V-P |
0 |
$595.88 |
| PWS-2AP55/30V-P |
0 |
$882.92 |
| PWS-2AP75/30V-P |
0 |
$1,133.58 |
|
Solarjack
SDS-Q-128 Submersible Pump
The SDS-Q-128 is a 4-diaphragm medium head higher flow pump, constructed
of marine grade bronze and 304 stainless steel. It can pump up to
100 feet from the water level in the well to the top of the tank.
This pump should have its diaphragm replaced yearly to insure long
life. (If the diaphragm fails, the motor will be ruined.) Dimensions
are 4.3” OD x 12.25” long. A 5” or larger well casing and ¾” drop
pipe is required for this pump. Ship weight is 19 pounds. |
Solarjack
Submersible Pump and Controllers
|
| Name |
Weight
( ) |
Price |
| SDS
PCA10-30B |
3 |
$242.00 |
| SDS
PVA5-30A |
3 |
$242.00 |
| SDS-Q-128
Minor Repair Kit |
42 |
$120.00 |
| SDS-Q-128 |
18 |
$822.00 |
|
LVM
Submersible Pump
LVM pumps are constructed of polyacetal plastic, enabling them to
pump almost any liquids. They are small enough to enter the opening
in a 5 gallon container or a 2 inch well casing. The outlet is a
½” hose barb. The intake has a removable strainer with another hose
barb for inline use. These pumps can be used for most general pumping
intermittent applications, like hosing down cars, vans, boats, pumping
into and from containers, emptying bilges, etc. These pumps are
designed for 12 volt operation and will be damaged by array direct
operation if voltage goes above 15 volts. Made in England. LVM 105
comes with battery clips. |
Name |
current (amps) |
Flow Rate (gpm) at 0 psi |
Pressure (max psi) at 0 flow |
Max head (feet) |
Dimensions |
weight |
cable length |
item code |
price |
LVM105 |
4.5 |
4 |
14 |
32 |
1.5"x 6.54" |
1.1 |
12 feet |
75.8052 |
$99 |
LVM107 |
2 |
2 |
11 |
20 |
1.5"x 6.54" |
0.5 |
3 feet |
75.8054 |
$77 |
LVM111 |
6 |
6 |
14 |
32 |
1.5"x 6.54" |
1.5 |
12 feet |
75.8058 |
$125 |
Teel
Marine Submersible Pump
This is a compact, submersible centrifugal 12 volt pump. It is designed
as an intermittant duty water pump for campers or trailers, or as
a light duty bilge pump for small boats. It can be mounted in any
position, submerged or open air, as long as the inlet is below the
level of the liquid being pumped. It has a 5 foot cord, dual inlet
plates (a screen and a 1/2’ pipe thread) and a 3/8” pipe thread
outlet. Flow is 5.65 gallons per minute at 1 foot of head and 1.5
gallons per minute at 10 feet of head. 5-foot cable. |
| Name |
Price |
| Teel
Marine 12V Pump |
$35.00 |
|
|
